The x2 Golf: fairway- friendly

The Segway® Personal Transporter (PT) x2 Golf is fun, easy to maneuver, and much smaller than a standard golf car. Special low-pressure tires barely disturb the turf and provide a smooth ride over a variety of terrain. Based upon the Segway x2, it features new LeanSteer technology, a wireless InfoKey controller, long-lasting Saphion® lithium-ion batteries and includes the following components:

  • Golf Bag Carrier Attachment secures your golf bag to the Segway x2 Golf and allows for easy dismount and club access while playing. Removes easily for storage and transport

  • Scorecard Holder keeps your scorecard, golf balls, and tees readily accessible

x2 Golf Specifications at a Glance:
Maximum speed: 12.5 mph / 20 km/h
Carrying capacity: 260 lbs / 118 kg
Footprint: 26.5 x 33 in / 67cm x 84 cm
Weight: 120 lbs / 54.4 kg + accessories
Battery type: Two Saphion® lithium-ion battery packs
Battery range:

Up to 14 miles / 22.52 km, (up to 36 holes) - depending on terrain and riding style

Motors: Two brushless, DC servomotors

10 in / 25 cm black aluminum wheels


8 in / 20 cm wide low-pressure tires, with special low-profile turf tread

Platform height:

9.5 in / 24.13 cm

Ground clearance: 4.5 in / 11.43 cm
Display: Wireless Infokey Controller
Detailed Specifications:


Top speed and turning rate

The maximum forward speed and turning rate of your Segway x2 can be set using the wireless InfoKey controller. The two settings are:
  • Beginner Mode:
    Maximum speed: 6 mph / 9.6 km/h
    Slower turning rate

  • Regular Mode:
    Maximum speed: 12.5 mph / 20 km/h
    Most responsive turning rate


10-14 miles / 16-22.5 km off pavement

The range for the Segway x2 varies with terrain, payload and riding style. Under normal riding conditions on the course, you can expect to ride about up to14 miles.

Operating range

When stored and charged at room temperature, the Segway x2 can operate in environments ranging from 14º to 122º F / -10º to 50º C. Actual performance is dependent on battery temperature, terrain, riding style and payload.


The x2's enhanced-traction tires and wider track make it ideal for rugged terrain. The Segway x2's inertial sensors constantly monitor the rider's position relative to gravity. This allows the Segway x2 to adjust for changes in terrain while keeping the rider upright.


Total capacity (rider & cargo): 260 lbs / 118 kg
Rider: 100-250 lbs / 45-110 kg

The Segway x2 can carry up to a 250 lb. adult. It can also be fitted with optimal Segway accessories for a total capacity of 260 lbs.


Platform height: 8 in / 20 cm
Footprint: 21 in x 30.5 in / 53.3 x 77.5 cm
Ground Clearance: 3 in / 7.6 cm

We designed the Segway x2 to take up not much more space than the average person. A little wider than the average person's shoulders, it raises you about 9.5 inches off the ground, providing a clear sight line of your surroundings.


120 lbs / 54.4 kg

The Segway x2 was built to handle rugged terrain. It can fit in the back of most minivans and SUVs. The standard lower cargo frames provide a convenient handhold for lifting.

Turning radius

One characteristic of any person is the ability to turn in place without impacting any nearby person or object, something few vehicles can do. By balancing on a single axle, Segway x2 riders can also turn in place.


Lithium-ion (Li-ion) Battery Packs

The Segway x2 comes standard with Saphion lithium-ion battery packs. The batteries are designed with on-board electronics that automatically monitor both the condition and temperature of the batteries. Batteries can be recharged by utilizing any 90 to 260 volt and 50 to 60 Hz AC outlet (typically accessible in most countries). A complete cycle charge will take eight to ten hours, about the cost of a newspaper. Li-ion batteries are designed for approximately 1000 full charge/discharge cycles.

Range, battery life and recharge times can be affected by factors such as terrain, temperature, speed of operation, rider weight and load, proper storage techniques and environmental conditions.


Redundant electrical systems
Robust mechanical systems

Safety is our top priority in both design and operation. To help ensure that both Segway x2 users and those near them remain safe, we built redundancy into the balancing and electrical systems. If any system begins operating at diminished capacity, the other is programmed to assume responsibility. This allows the Segway x2 to maintain balance and bring the rider to a safe stop.

The highest design standards were implemented in building the Segway x2's mechanical structures, and each part has been thoroughly tested and analyzed to ensure such high standards were met.